Keep Your Sump Pump in Top Condition: 6 Ways to Avoid Water damage

6 Ways to Avoid Water damage

A sump pump is an important piece of machinery for many houses, especially those that are likely to be flooded or are in low-lying places. The main job of this gadget is to get rid of water that builds up in a sump tank, which is usually found in home’s  basements. It’s essential to do routine maintenance on your sump pump to keep it operating well and avoid water damage. Here are six important steps to maintain the best possible condition for your sump pump.

Check the Pump’s Operation:

Regularly examine your sump pump’s operation to ensure that it will function whenever you need it most. Just fill up the sump basin with water from a bucket. As soon as the pump detects water, it should start working automatically. Watch the pump while it works. It should turn on quickly, get rid of the water quickly, and then turn off when the level of water is low enough. Pumps that are difficult to start, run slowly, or won’t turn off may require servicing from a qualified plumber like

Clean Out The Sump Basin:

Sump basins can become clogged with dirt, sand, and stones over time, which can reduce the pump’s effectiveness. Maintaining a clean sump basin will help avoid this. You should turn off the power to the pump first. After you’ve cleaned out the basin, take the pump out. Smaller particles can be extracted from the basin’s bottom using a wet/dry vacuum. After you’ve cleaned the basin, carefully replace the pump and plug it back into an electrical socket.

Evaluate the Discharge Line:

A sump pump system would be incomplete without the discharge line, which is in charge of removing water from your home. Check the outlet line often to make sure it is not frozen or clogged. Look for visible blockages and ensure the line is firmly secured and properly sloped to allow for optimum water flow. It’s especially important to make sure that the discharge line doesn’t freeze in the winter, because that can make the pump work less efficiently or not properly at all.

Make Sure That The Float Switch Works:

The sump pump’s float switch is an essential component that regulates the pump’s on/off operation according to the basin’s water level. Check the float switch on a regular basis to make sure it can move freely and is not blocked. The pump might not be able to start or stop properly if its float switch becomes stuck. Lift the float switch manually to check that it functions during your inspection. When you lift the float, the pump should start, and when you lower it, it should stop. If that doesn’t work, you might have to replace or adjust the switch.

Look at the Check Valve:

Another crucial part that stops pumped-out water from returning to a sump basin is the check valve. Always check the check valve on your sump pump to make sure it works well. After proper installation, the water flow direction should be away from the pump. The pump will have to work harder and last shorter if the check valve is malfunctioning or not placed correctly, allowing water to flow back into the basin. In order to keep the pump running properly, you may need to change the check valve.

Schedule Professional Maintenance:

It’s important to perform routine DIY maintenance on your sump pump, but it’s also strongly advised to schedule expert maintenance. An expert like can carry out a comprehensive examination, spot possible problems that you might overlook, and carry out any required maintenance or repairs. Get a professional to check your sump pump once a year, or more often if your house floods a lot. This preventive strategy can help your sump pump last longer and perform efficiently when it is needed the most.

Leave a Reply

Your email address will not be published. Required fields are marked *